These assignments are to accompany the course Manufacturing Processes II
Lab Safety
LECTURE SLIDES Release of Liability - This will be done in-person on paper. Safety Guidelines – Soldering (Iron Soldering) Machine Shop Safety – Eye Hazards Machine Shop Safety – Entanglement Hazards Machine Shop Safety – Impact Hazards Machine Shop Safety – Crushing Hazards NOTE: Chemical safety is also extremely important as it affects your health...
Measurement Instruments
These should be a review. We will review them briefly in class, but they will be on every test this semester. Fractions and Decimals on an Inch Tape Measure Ruler (8 and 16 divisions) Tape Measure (16 and 32 Divisions) Ruler (Inch with 32 and 64 divisions) Machinists Rule – inch (10 & 100 divisions)...
AutoCAD Review
These assignments are intended to be a review of concepts covered in the Engineering Graphics course. The reviews cover the most commonly used commands in AutoCAD. These are based on Zen and the Art of AutoCAD, a one hour review (with video) of some of the most commonly used AutoCAD commands. AutoCAD ReviewAutoCAD Review Part...
Fixed Cantilever Lab
Fixed Cantilever Assignment
GD&T Inspections
GD&T Inspections Lab
Threaded Adapter
Single Point Threading Threaded AdapterDownload UN Thread Limits .750-.875Download
Plastics: Components, Processes, and Materials
See the PDF below: Plastic ComponentsDownload
Injection Molding
Use the Galomb benchtop injection molding machine to make fidget spinners. Evaluate each lobe for perpendicularity and record the total indicator reading (TIM). Identify possible sources of variation. Take corrective action and demonstrate improvement by measuring perpendicularity again.
CNC Plasma Cutting
Assignment Slides Design a book end. What to bring: One file: A R-12 DXF of your design.See the assignment slides for details. Don't email me the file. Bring it on a USB drive.
Lab Safety
LECTURE SLIDES
Release of Liability - This will be done in-person on paper.
Safety Guidelines...
Measurement Instruments
These should be a review. We will review them briefly in class, but they will be on every test this...
AutoCAD Review
These assignments are intended to be a review of concepts covered in the Engineering Graphics course....
AutoCAD Review Part 4
Create the appropriate orthographic views of the part shown below. Use third angle projection. Dimension...
AutoCAD Review Part 5
Create a drawing of the hook as dimensioned in the print below. You will need to scale the drawing.
